MERCADO
INDUSTRIES
WE ARE COMMITTED TO THE DEVELOPMENT OF QUALITY
AFTERMARKET AUTOMOTIVE PRODUCTS.
Bring you quality products since 1990
1024 X 768 RESOLUTION IS REQUIRED TO PROPERLY VIEW THIS WEB PAGE
|
WE ARE COMMITTED TO THE DEVELOPMENT OF QUALITY AFTERMARKET AUTOMOTIVE PRODUCTS.
Bring you quality products since 1990
1024 X 768 RESOLUTION IS REQUIRED TO PROPERLY VIEW THIS WEB PAGE
|
|
DEALERS & INSTALLERS
E-mail us
Site updated June 24 2008
© Copyright 2008 by Mercado Industries All items shown are patent pending. OFFICIAL WEB SITE FOR EURO GRILLES C4DHR |
C4 UNDER HOOD EURO VENT GRILLE KIT INSTALLATION INSTRUCTIONS
Thank-you for the purchase of our new C-4 UNDER HOOD EURO VENT GRILLE KIT product.
Please follow the installation and care instructions exactly to insure you get the maximum usage and benefits from this product.
TOOLS AND ADDITIONAL ITEMS REQUIRED
1) Ratchet set and Torx socket set
INSTALLATION TIME - 1 hour
Fully polish the metal screens, using a metal polish before you apply them.
Remove the torx bolts holding the rubber shield in front of the vent panels and move it back. Remove the driver and passenger vent panels using the torx socket. Operate and position the wipers to the middle position.
Slide the new vent grille in to position. Insure that the top section slides in between a small section between the windshield glass and the lower backing. You will need to bend the rubber shield back to insure that the grille slides into position.
Position the grille and install the torx bolts. Reinstall the lower rubber seal.
Remove the torx bolts holding the rubber shield in front of the vent panels and move it back. Remove the driver and passenger vent panels using the torx socket. Remove the metal plate covering the 2nd opening on the passenger side.
Slide the new vent grille in to position. Insure that the top section slides in between a small section between the windshield glass and the lower backing. You will need to bend the rubber shield back to insure that the grille slides into position. Position the grille and install the torx bolts. On the passenger side grille only the 2 lower left and right bolts are necessary to secure the grille. Reinstall the lower rubber seal.
FINISHED!
CARE OF THE C-4 ROUND HOLE STAINLESS STEEL UNDER HOOD EURO GRILLE KIT PRODUCT
The product is designed to last the entire life of your car under normal conditions. The product will resist heat, cold, rain, wind, and impacts. Although this product is durable, it will not survive a major curb impact or a front-end collision.
Your C-4 EURO GRILLE KIT is high quality stainless steel and can be cleaned normal car wash soap. You may also a stainless steel polish and a buffer to increase the shine factor.
|
|
Copyright by MERCADO INDUSTRIES © 2008 |
